Filter
Top Products
TANDBERG Gatekeeper User Guide
Page 89 of 105
16.3.28. TransformDelete
xCommand TransformDelete <index>
Deletes the transform with the specified index.
Note: a list of all current transforms can be obtained using the command:
xconfiguration gatekeeper transform.
16.3.29. ZoneAdd
xCommand ZoneAdd <name> <IPAddress>
Adds a new zone with the specified name and IP address.
The zone is pre-configured with a link to the default subzone and a pattern match mode of
AlwaysMatch.
16.3.30. ZoneDelete
xCommand ZoneDelete <index>
Removes the zone with the specified index.