Filter
Top Products
TANDBERG Gatekeeper User Guide
Page 95 of 105
18. Appendix B: Configuring LDAP Servers
18.1. Microsoft Active Directory
18.1.1. Prerequisites
These comprehensive step-by-step instructions assume that Active Directory is installed. For details on
installing Active Directory please consult your Windows documentation.
The following instructions are for Windows Server 2003 Enterprise Edition. If you are not using this
version of Windows, your instructions may vary.
18.1.2. Adding H.350 objects
1. Create the organizational hierarchy
Open up the Active Directory Users and Computers MMC snap-in. Under your BaseDN right-click and
select New Organizational Unit. Create an Organizational unit called h350.
Note: It is good practice to keep the H.350 directory in its own organizational unit to separate out
H.350 objects from other types of objects. This allows access controls to be setup which only
allow the Gatekeeper read access to the BaseDN and therefore limit access to other sections of
the directory.
2. Add the H.350 objects
Create an ldif file with the following contents:
# MeetingRoom1 endpoint
dn: commUniqueId=comm1,ou=h350,dc=my-domain,dc=com
objectClass: commObject
objectClass: h323Identity
objectClass: h235Identity
commUniqueId: comm1
h323Identityh323-ID: MeetingRoom1
h323IdentitydialedDigits: 626262
h235IdentityEndpointID: meetingroom1
h235IdentityPassword: mypassword
Add the ldif file to the server using the command:
ldifde -i -c DC=X <ldap_base> -f filename.ldf
This will add a single H.323 endpoint with an H.323 Id alias of MeetingRoom1 and an E.164 alias of
626262. The entry also has H.235 credentials of id meetingroom1 and password mypassword which
are used during authentication.