Filter
Top Products
TANDBERG Gatekeeper User Guide
Page 60 of 105
14.5. Logged Events
Events logged at level 1
Event Description
Eventlog Cleared
An operator cleared the event log.
Admin Session Start
An administrator has logged onto the system.
Admin Session Finish
An administrator has logged off the system.
System Configuration
Changed
An item of configuration on the system has changed.
The Detail event parameter contains the name of the changed
configuration item and its new value.
Policy Change
A policy file has been updated.
Registration Requested
A registration has been requested.
Registration Accepted
A registration request has been accepted.
Registration Rejected
A registration request has been rejected.
The Reason event parameter contains the H225 cause code.
Optionally, the Detail event parameter may contain a textual
representation of the H.225 additional cause code.
Registration Removed
A registration has been removed by the Gatekeeper/Border
Controller.
The Reason event parameter specifies the reason why the
registration was removed. This is one of:
Authentication change
Conflicting zones
Operator forced removal
Operator forced removal (all registrations removed)
Call Answer Attempted
An attempt to answer a call has been made.
Call Attempted
A call has been attempted.
Call Connected
A call has been connected.
Call Disconnected
A call has been disconnected.
Call Rejected
A call has been rejected.
The Reason event parameter contains a textual representation of
the H.225 additional cause code.
Call Bandwidth Changed
The bandwidth of a call has changed.