Filter
Top Products
TANDBERG Gatekeeper User Guide
Page 68 of 105
16. Command Reference
This chapter lists the basic usage of each command. The commands also support more advanced
usage, which is outside the scope of this document.
16.1. Status
The status root command, xstatus, returns status information from the Gatekeeper.
16.1.1. Listing all status information
To list all status information, type:
xstatus
Status is reported hierarchically beneath the status root. It is possible to reduce the amount of
information returned by xstatus by specifying a more detailed status command.
16.1.2. Listing all status commands
To list all xstatus commands available at the root level type:
xstatus ?
16.1.3. Calls
xstatus Calls
Returns information about all active calls on the system.
xstatus Calls Call <index>
Returns information about the specified call.
16.1.4. Ethernet
xstatus Ethernet
Returns the currently active configuration of the Ethernet interface.
MacAddress
Returns the MAC address of the LAN 1 interface.
Speed
Returns the speed of the Ethernet link.
Reports Down if the link is down or not connected.