Filter
Top Products
Service Information
P6434 Probe Instructions
27
8. Position a latch release on each side of the case half. See Figure 21.
Figure 21: Reattaching the latch releases and case halves
9. Align the pin 1 case half with the pin 1 side of the connector, attach the case
halves, and reconnect the screws as shown in Figure 21.
To reassemble the latch release grip, follow these steps:
1. Place the latch release cords into the latch releases as shown in Figure 22.
2. Push the latch release downward to force the latch release cord to snap
through the slot and into the small hole.
Latch Release Grip