Filter
Top Products
P6434 Probe Instructions
v
Preface
These instructions cover the following topics:
H Operating basics
H Designing an interface between the P6434 probe and a system under test
H Service information
H Replaceable parts list
Information in these instructions assumes your system under test (SUT) is based
on a microprocessor. If your SUT is not based on a microprocessor, you should
substitute the type of device on which your system is based for “microprocessor”
throughout these instructions.
For information on how to connect P6434 Mass Termination Probes to a
Tektronix microprocessor support (TMS) probe adapter, refer to the instruction
manual for the TMS package.
Contacting Tektronix
Product
Support
For application-oriented questions about a Tektronix measure-
ment product, call toll free in North America:
1-800-TEK-WIDE (1-800-835-9433 ext. 2400)
6:00 a.m. – 5:00 p.m. Pacific time
Or contact us by e-mail:
tm_app_supp@tektronix.com
For product support outside of North America, contact your
local Tektronix distributor or sales office.
Service
Support
Contact your local Tektronix distributor or sales office. Or visit
our web site for a listing of worldwide service locations.
www.tektronix.com
For other
information
In North America:
1-800-TEK-WIDE (1-800-835-9433)
An operator will direct your call.
To write us Tektronix, Inc.
P.O. Box 1000
Wilsonville, OR 97070-1000