Filter
Top Products
B
RARP and BOOTP
B-2
Network Utilities for Phaser Color Printers
4.
Edit the /etc/ethers Þle to add the printer Ethernet addresses and
names:
08:00:11:01:00:45 P480-mktg
08:00:11:01:00:46 P480-sales
5.
Some hosts require an explicit update to the arp table to add new
entries. This command is host-speciÞc; check your host
documentation for details. For example, the following command
lines add the Ethernet addresses of two Phaser 480 printers to the
arp table:
arp -s ether P480-mktg 08:00:11:01:00:45
arp -s ether P480-sales 08:00:11:01:00:46
The ether switch indicates an Ethernet address. The arp command can be
run with a -f Þlename option, where Þlename is a Þle of the printer entries
to set.
6.
Restart the rarpd daemon without rebooting the system to put the
changes you have made into effect. Use one of the following
methods.
For BSD systems
a.
Find out the process ID number for the rarpd daemon; type:
ps -aux | grep rarpd
This command produces the following output:
root 193 0.0 0.0 48 0 ? IW Oct 24 0:12 rarpd
root 12366 0.0 0.3 32 196 pb S 11:55 0:00 grep rarpd
b.
Restart the rarpd daemon, which is process ID number 193 in
this example. Type:
kill -HUP 193