Tektronix 200 Series Printer User Manual


 
4
Novell NetWare Configuration
4-24
Network Utilities for Color Printers
How to disable protocols
After your network conÞguration is complete, you may want to disable
protocols that you are not using to avoid unnecessary network trafÞc. To
disable protocols, send the appropriate PostScript language Þle to the
printer. The Þles are on the PC version of the printerÕs network utilities
diskettes.
1.
Send the appropriate PostScript Þle to the printer. (Use the
following table to determine the appropriate PostScript Þles for
disabling and enabling protocols.)
2.
Reset the printer. (For more information about resetting the
printer, see ÒResetting your printerÓ on page 2-11).
PostScript Þles for disabling and enabling protocols
Protocol To disable protocols To enable protocols
EtherTalk NET-UTIL\ETALKOFF.PS NET-UTIL\ETALKON.PS
TCP/IP NET-UTIL\TCPIPOFF.PS NET-UTIL\TCPIPON.PS