Filter
Top Products
Novell NetWare Configuration
4
User Manual
4-29
5.
Verify that the printerÕs print server name matches the one created
on the Þle server. The conÞguration page reports the printerÕs
print server name. For information on printing the conÞguration
page, see ÒYour printerÕs conÞguration pageÓ on page 2-3.
6.
Verify that set allow encrypted passwords=on has been set. See
ÒAllowing unencrypted passwordsÓ on page 4-3.
7.
Verify that the frame type the printer is using is supported by the
Þle server. See ÒPrinter does not appear in the Advanced
ConÞguration ToolÓ on page 4-25.
Job is serviced, but does not print
■ Use the Advanced ConÞguration Tool to check the printerÕs status.
Select Print server status under the Status menu.
■ You can use PCONSOLE to check the print job. Select the queue
where the job was sent, then select the Current Print Job entries to
view the jobs. If the job is being serviced it will indicate this along
with the name of the print server servicing the job.
■ If the Þle contains control characters, make sure that control
character Þltering is enabled (the factory default). If necessary,
enable Þltering by sending the PostScript Þle FILTER.PS to the
printer. FILTER.PS is in the NET-UTIL directory on the PC version
of your printerÕs network utilities diskettes.