Filter
Top Products
User Manual
4-1
Chapter
4
Novell NetWare
Configuration
Your Tektronix printerÕs internal NetWare interface implements the
PSERVER model. Under this model, print jobs are stored in queues
(directories) on a Þle server. A print server takes print jobs from the queues
and sends them to printers. In your Tektronix printer, the print server
resides within the internal interface of the printer, so in effect, the print
server and the printer are one. The printer logs in to a Þle server using a
login connection to service speciÞed queues.
Your Tektronix printerÕs internal NetWare interface supports NetWare
versions 2.2, 3.11, and 4.0. It supports up to 32 queues and 8 Þle servers in
any combination. No additional VAPs (Value Added Procedures), NLMs
(Network Loadable Modules), or TSRs (Terminate Stay Resident programs)
are required to install your Tektronix printer on the network.
Before you begin
Before you begin the NetWare conÞguration, make sure that you have
completed the following steps:
■ Your printer should be set up and connected to the network. See
your printerÕs user manual for information about setting up and
turning on the printer. For information about connecting the
printer to the network, see ÒEthernet connectionÓ on page 2-6.
■ If you are using Windows, the Tektronix driver for your printer
should be installed on every PC that will be sending print jobs to
the printer. For details on driver installation, see the printerÕs user
manual.