Filter
Top Products
5
TCP/IP Configuration
5-30
Network Utilities for Phaser Color Printers
To create a PostScript Þle to control these parameters, use the script
conÞg-SNMP provided on the UNIX version of the printerÕs network utilities
diskettes.
1.
Make sure that the printer is connected to the network.
2.
Run the script conÞg-SNMP:
a.
Change (cd) to the bin subdirectory in the directory where you
placed your printerÕs network utilities.
b.
Run the script, redirecting the output to a Þle. Type:
conÞg-SNMP > filename
3.
When prompted, provide the information for the SNMP utility.
4.
Send the Þle named in Step 2b to the printer using lp or lpr.