Filter
Top Products
EtherTalk Configuration (Macintosh)
3
User Manual
3-3
Finding your printerÕs name in the Chooser
1.
Select the Chooser from the Apple menu.
2.
In the upper-left corner of the Chooser, Þnd the printer driver icon
for your Tektronix printer. (If the printer driver icon does not
appear in the Chooser, you need to install the printer driver.)
Click on the printer driver icon for your Tektronix printer.
3.
Select the proper zone in the list of AppleTalk Zones in the
lower-left portion of the Chooser.
Note
The printerÕs default zone is listed in the EtherTalk Þeld on the
conÞguration page. For more information on the conÞguration
page, see ÒYour printerÕs conÞguration pageÓ on page 2-3.
4.
A list of printers appears in the right portion of the Chooser. Find
the name of your printer in the list. The printerÕs default name is
listed on the conÞguration page (see ÒYour printerÕs conÞguration
pageÓ on page 2-3). If the name does not appear, check the cable
connection between your printer and the network.