Filter
Top Products
User Manual
2-1
Chapter
2
Network Printing with
Tektronix Color Printers
Many Tektronix color printers are equipped with a rear panel Ethernet
connector. However, to make the connector active, internal hardware is
required. The internal hardware can be purchased initially with the printer
as an option or later as an upgrade kit. The internal hardware is a small
circuit board installed inside the printer.
How to tell if the Ethernet internal hardware is installed in
your printer
To determine if the Ethernet internal hardware is installed, look for the label
near the Ethernet port on the printerÕs rear panel. If the Ethernet option is
installed, a label showing the word ÒINSTALLEDÓ is attached; otherwise,
ÒNot InstalledÓ is visible.
If the Ethernet internal hardware is installed, the printerÕs startup page and
conÞguration page list the following Þelds:
Startup page ConÞguration page
Ethernet Protocols
Ethernet Address
Authorization Code
Ethernet Address
Authorization Code
EtherTalk
NetWare PrintServer
TCP/IP
LPR
AppSocket
Syslog
SNMP