Filter
Top Products
190 Printing Guide — Installing Client Software for UNIX
For e-STUDIO4511 Series
/usr/sbin/lpadmin -p <queue name> -v /dev/null \
-m net_est4511 -o rm <queue name> -orpdssc -ob3
For e-STUDIO450 Series and e-STUDIO280 Series
/usr/sbin/lpadmin -p <queue name> -v /dev/null \
-m net_estbw -o rm <queue name> -orpdssc -ob3
12. Enter the following command:
accept <queue name>
13. Enter the following command:
enable <queue name>
14. If you turn OFF the scheduler in step 10, turn the scheduler
ON. Enter the following command:
/usr/lpsched > /dev/null 2>&1
Creating a print queue manually on IBX AIX
1. Enter the following command:
ls /opt/toshiba/tap/filter
2. If the above directory does not exist, enter the following com-
mand:
mkdir /opt/toshiba/tap/filter
3. Log on to the root account.
4. Open your Linux/Unix editor.
5. Create the following file.
/etc/lp/interfaces/<queue name>.conf
6. Add a line as below in the <queue name>.conf.
dest=<IP address>
7. Save the file.
8. Enter the following command:
mkque -q <queue name> \
-a s_statfilter = /usr/lib/lpd/bsdshort \
-a up = TRUE -a host = <IP address> -a rq = dssc
9. Enter the following command:
For e-STUDIO4511 Series
mkquedev -q <queue name> -d dev_<queue name> \
-a backend = /opt/toshiba/tap/bin/est4511Backend