Filter
Top Products
e-STUDIO281c/351c/451c
Procedure
* The adjustment is performed by the service technician only.
(1) Enter adjustment mode [05]. Change the values for codes [1075 to 1077] to adjust the black density of a
scanned-in image.
Color mode Original mode [05] code Value recommended
Acceptable
value range
Default
Text 05-1075
Printed image 05-1076
Full color
Photo 05-1077
Set a value larger than 0. 0 to 4 0
* Setting "0" provides the lightest black, while setting "4" the darkest.
Cautions after the completion of the adjustment
The adjustment may possibly cause the background color to become too dark. Therefore, carefully perform the
adjustment, while checking the scanned-in image.
5. Scanning-specific Adjustments
5.6