Filter
Top Products
e-STUDIO281c/351c/451c
1.3 To Minimize Variations in the Image Quality after Power-on
(To optimally program image quality control)
Before the adjustment After the adjustment
The image quality varies, depending on the
operating environment or condition at power-on.
The uniform image quality is ensured, every
time the copier is turned on.
Explanation
If copying or printing is performed immediately after the copier is turned on or when it is returned from energy
saving mode, there will be variations in the density of the image. (It will not occur when the copier is temporarily
turned off and on for releasing jammed paper or when it is shortly returned from energy saving mode.) Switch the
image quality control mode to the mode, which gives a higher priority to accuracy in image quality control, in order
to ensure the uniform image quality, every time the copier is turned on.
* Image quality control is performed in mode 1 by default, which is intended to reduce the warm-up time.
Switch it to mode 2, which is intended to increase the interval during which image quality control is performed.
1. General Adjustments – Copying, Printing and e-Filing (Output from Box)
1.3
Immediately after power-on
Immediately after power-on
Immediately after power-on
Immediately after power-on