Filter
Top Products
Power and PowerUp Modes
TOSHIBA A40 Series 614
TOSHIBA A40 Series Version
1
Last Saved on 02/12/2003 17:24
ENGLISH using Euro_M.dot –– Printed on 02/12/2003 as IM_A40EN
Installing the battery pack
To install a battery pack, follow the steps below.
The battery pack is a lithiumion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.
Do not touch the latch while holding the computer, or you may get injured
by the dropped battery by unintentional release of the latch.
1. Turn the computer’s power off.
2. Disconnect all cables connected to the computer.
3. Insert the battery pack.
4. Secure the battery pack lock. Switch the battery safety lock into lock
position.(direction toward the battery)
Securing the battery pack