Filter
Top Products
Troubleshooting
TOSHIBA A40 Series 920
TOSHIBA A40 Series Version
1
Last Saved on 02/12/2003 17:24
ENGLISH using Euro_M.dot –– Printed on 02/12/2003 as IM_A40EN
Standby/Hibernation
Problem Procedure
The system will not
enter
Standby/Hibernation
Is Windows Media™ Player open? The system
mi
g
ht not enter Standby/Hibernation, if Windows
Media Player is either playing a selection or
finished playing a selection. Close Windows
Media Player before you select
Standby/Hibernation.
If problems persist, contact your dealer.
LAN
Problem Procedure
Cannot access LAN Check for a firm cable connection between the
LAN jack and the LAN HUB.
If problems persist, consult your LAN
administrator.
Real Time Clock
Problem Procedure
The following message
is displayed on the
LCD: RTC battery is
low or CMOS
checksum is
inconsistent. Press F1
key to set Date/Time.
The battery for RTC is wearing. Set the date and
time in BIOS setup with the following steps:
1. Press F1 key. BIOS setup will boot up.
2. Set the date in System Date.
3. Set the time in System Time.
4. Press End key. Confirmation message will
appear.
5. Press Y key. BIOS setup will terminate and
the computer will be rebooted.