Filter
Top Products
Troubleshooting
TOSHIBA A40 Series 912
TOSHIBA A40 Series Version
1
Last Saved on 02/12/2003 17:24
ENGLISH using Euro_M.dot –– Printed on 02/12/2003 as IM_A40EN
Problem Procedure
Some CD/DVDs run
correctly, but others
do not
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software’s needs.
Check the CD/DVD’s documentation.
Check the type of CD/DVD you are using. The
drive supports:
DVDROM: DVDROM, DVDVideo
CDROM: CDDA, CDText, Photo CD
(single/multisession), CDROM
Mode 1, Mode 2, CDROM XA
Mode 2 (Form1, Form2), Enhanced
CD (CDEXTRA), CDG (Audio CD
only), Addressing Method 2
Check the region code on the DVD. It must
match that on the CDRW/DVDROM drive.
Region codes are listed in the Optical media
drives section in Chapter 2, The Grand Tour.
Cannot write correctly If you have trouble writing, make sure you are
observing the following precautions:
■ Use only media recommended by TOSHIBA.
■ Do not use the mouse or keyboard during
writing.
■ Use only the software supplied with the
computer for recording.
■ Do not run or start other software during
writing.
■ Do not jar the computer during writing.
■ Do not connect/ disconnect external devices
or install/remove internal cards during
writing.
If problems persist, contact your dealer.