Filter
Top Products
HW Setup and Passwords
TOSHIBA A40 Series 74
TOSHIBA A40 Series Version
1
Last Saved on 02/12/2003 17:24
ENGLISH using Euro_M.dot –– Printed on 02/12/2003 as IM_A40EN
Key FD
After you set a password, you can create a Key FD (diskette). If you forget
the user password, the Key FD lets you bypass the password function.
It is a good idea to create more than one Key FD in case a Key FD is
damaged or lost.
To create a Key FD follow the steps below.
1. Turn off the computer’s power.
2. Connect the diskette drive to a USB port on the computer.
3. Set a diskette’s writeprotect tab to the write enable position and
insert the diskette in the drive.
All data on the diskette will be destroyed.
4. Turn on the computer’s power.
S Password=
will be displayed on the LCD.
5. Enter the password.
6. Press the Tab key.
S Insert FD Ready (Y/N)
will be displayed on the LCD.
7. Press Y.
S Remove FD press key
will be displayed on the LCD.
8. Remove the diskette and press any key.
Device Config
Device Configuration
This option lets you set the device configuration.
All Devices BIOS sets all devices.
Setup by OS Operating system sets devices that it can
control. (Default)