Filter
Top Products
HW Setup and Passwords
TOSHIBA A40 Series 72
TOSHIBA A40 Series Version
1
Last Saved on 02/12/2003 17:24
ENGLISH using Euro_M.dot –– Printed on 02/12/2003 as IM_A40EN
There are also three buttons: OK, Cancel and Apply.
OK Accepts your changes and closes the HW Setup
window.
Cancel Closes the window without accepting your
changes.
Apply Accepts all your chan
g
es without closin
g
the HW
Setup window.
General
This window displays the BIOS version and contains two buttons: Default
and About.
Default Return all HW Setup values to the factory
settings.
About Display the HW Setup version.
Setup
This field displays BIOS Version and date.
Password
User Password
This option allows you to set or reset the user password for power on.
Not Registered Change or remove the password. (Default)
Registered Set the password. A dialog box will appear to let
you set the password.
To enter a user password:
1. Select Registered to display the following prompt:
S Enter Password:
2. Enter a password of up to 10 characters. (You cannot use the
following characters: ^ @ [ ] ; : , . / space.) The character string you
enter is displayed as a string of asterisks. For example, if you enter a
password consisting of four characters, the display is shown as:
S Enter Password: ****
If you click the OK button before entering the password, Not registered
will appear on the display.