Filter
Top Products
Operating Basics
TOSHIBA A40 Series 418
TOSHIBA A40 Series Version
1
Last Saved on 02/12/2003 17:24
ENGLISH using Euro_M.dot –– Printed on 02/12/2003 as IM_A40EN
Connecting
To connect the internal modem cable, follow the steps below.
The modular cable that comes with the computer must be used to
connect a modem. Connect the end of the modular cable with the core to
the computer.
In case of a lightning storm, unplug the modem cable from the telephone
jack.
Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
Plug one end of the modular cable into the modem jack.
Plug the other end of the modular cable into a telephone jack.
Connecting the internal modem
Do not pull on the cable or move the computer while the cable is
connected.
If you use a storage device such as an optical media drive or HDD
connected to a 16bit PC card, modem speed might be slow or
communication might be interrupted.
Disconnecting
To disconnect the internal modem cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the
connector.
2. Disconnect the cable from the computer in the same manner.
3. In the same way, pull the cable’s other connector out of the computer.