Filter
Top Products
User’s Manual 66
Hardware & Options Operation
To connect a USB device, plug the device’s connector into the USB port on
your tablet.
(Sample Illustration) Connecting a USB device
HDMI device
The tablet is equipped with an HDMI port that can send video by
connecting with external devices. 720p, 576p and 480p signal formats are
supported, but actually available signal format depends on each HDMI
device.
To connect external devices, follow the steps as detailed below:
1. Plug one end of the HDMI cable into the HDMI port of the HDMI
device.
2. Plug the other end of the HDMI cable into the HDMI port on your tablet.
Make sure the connector is properly aligned with the socket. Do not try to
force the connection, doing so can damage the connecting pins.
As the port operation of all USB devices has not been confirmed, some
USB devices may not function properly.
1. USB port
2. USB connector
1
2
■ This tablet does not support a printer connected to the USB port.
■ This tablet only support external USB HDD (FAT only) and USB Flash
Memory (FAT only) for data copy.
■ Though USB hubs, USB flash memory and USB HDDs are also
supported, the proper function and behavior of all such devices is not
guaranteed.
■ If the USB device you connected is not supported by this tablet, a
notification will be shown.
■ This tablet supports FAT12/16/32/exFAT format for USB memory and
USB hard drives.
As the port operation of all HDMI (High-Definition Multimedia Interface)
monitors has not been confirmed, some HDMI monitors may not function
properly.