Filter
Top Products
- 123 -
6.3.14 FEED COMMAND [ESC] T
Function Feeds the paper.
Format [ESC] Tabcde [LF] [NUL]
Term a: Type of sensor
0: No sensor
1: Reflective sensor
2: Transmissive sensor (when using normal labels)
3: Transmissive sensor (when using normal labels)
4: Reflective sensor
b: Selects cut or non-cut
0: Non-cut
1: Cut
c: Feed mode
C: Batch mode (Cut and feed when “Cut” is selected for parameter b.)
D: Strip mode (with back feed)
E: Strip mode (Reserved for future)
d: Feedspeed
1: 2 inches/sec
2: 2 inches/sec
3: 3 inches/sec
4: 4 inches/sec
5: 5 inches/sec
6: 5 inches/sec
7: 5 inches/sec
8: 5 inches/sec
9: 5 inches/sec
A: 5 inches/sec
e: With/without ribbon
Ignore
Explanation (1) Type of sensor
No sensor:
Feeding takes place according to the parameter designated by the Label Size
Set Command.
Reflective sensor:
Feeding takes place according to the parameter designated by the Label Size
Set Command. However, the black mark provided on the back side of the tag
paper is automatically sensed by the reflective sensor and the stop position is
finely adjusted.
Transmissive sensor (when using normal labels):
Feeding takes place according to the parameter designated by the Label Size
Set Command. However, the label-to-label gap is automatically sensed by the
transmissive sensor and the stop position is finely adjusted.