Filter
Top Products
- 9 -
[Self-test printing]
a. Printing program version & check sum
b. Printing various parameters
Parameter Initial value
Print density fine adjustment 0
Print position fine adjustment 0 mm
Amount for finely the cut position 0 mm
Type of character code PC-850
Font of zero 0 (without slash)
Communication speed 9600 bps
Data length 8 bits
Stop bit length 1 bit
Parity NONE
Transmission control 2
Forward feed wait ON
Control code AUTO
Feed key function FEED
Euro code B0 H
X-coordinate adjustment 0 mm
Sensor selection Transmissive
4.2 ONLINE MODE FUNCTIONS
The online mode provides the following functions for issuing labels.
(1) Issuing labels (by external equipment interface commands)
(2) Paper feed (by the [FEED] key)
(3) Error indication
(4) Sensor selection
Transmissive sensor, reflective sensor and non-sensor mode are available.
To select the sensor for the media, turn on power to let printer online mode. Open printer cover,
the LED will be turned off. Press FEED key for over 5 seconds, and then release the button, then
printer will enter sensor selection mode.
In sensor selection mode, if LED is changed to green color and press FEED key again, then
reflective sensor is selected.
If LED is changed to orange color and press FEED key again, then non-sensor is selected.
If LED is changed to red color and press FEED key again, then transmissive sensor is selected.