Filter
Top Products
- 169 -
o: [FEED] key function
0: FEED: Feeds one label.
1: PRINT: Prints data from the image buffer on one label.
p: Kanji code selection
0: Ignore
1: Ignore
qq: Euro code setting
“20” to “FF” (Specify the hex code in 2 bytes of ASCII code)
*1
r: Automatic head broken dots check
0: Ignore
1: Ignore
s: Centronics ACK/BUSY timing setting
0: Ignore
1: Ignore
t: Web printer function setting
0: Ignore
1: Ignore
Explanation (1) This command is not executed until the printer enters an idle state.
(2) With some exceptions, the parameters set by this command become effective
when the power is turned on or the printer is reset.
*1: To specify the hex code to be set in 2 bytes of ASCII code as shown below:
Example 1: To set 36H: ”36” (33H, 36H)
Example 2: To set 42H: ”42” (34H, 32H)
Example 3: To set FFH: ”FF” (46H, 46H)