Filter
Top Products
7-3
1
2
3
4
5
6
7
9
10
11
12
8
2. LOADING PAPER
When the paper supply in the selected paper cassette runs out, the Recording Paper Lamp flashes and
the following message appears:
1
Pull the cassette grip up and pull, out the cassette
carefully until it comes to a stop.
2
Open a paper package, take out the whole ream of
paper and place it in the cassette.
• Up to 550 sheets of paper (recommended by Toshiba) can
be set in each cassette.
• Do not add paper above the line indicated on the guide.
• Do not use creased, folded, wrinkled or damp sheets of
paper.
3
Push the cassette straight in until it comes to a stop.
• Be sure to push the cassette in carefully and fully.
CASSETTE1 empty
Open CASSETTE1
Load Paper
Close CASSETTE1
Adding Paper to the Cassettes
Note
Make sure that a gap of approx. 0.5 mm (less than 1 mm in
total) is left between the paper and the side guide. No gap
causes paper misfeeding.
Approx.0.5mm
Approx.0.5mm
Side guide
Side guide