Filter
Top Products
1
2
3
4
5
6
7
9
10
11
12
8
7-24
WHEN THE GRAPHIC SYMBOL FLASHES
6. ADDING STAPLES
Finisher (option for e-STUDIO20/25)
1
By pulling the lever, move the finisher away care-
fully from the copier.
4
Remove the empty staple case upward from the
staple cartridge.
5
Push in a new staple case into the staple cartridge
completely inside until a click is heard.
• Do not remove the seal holding the staples before the staple
case is set in the cartridge.
2
Holding the sides of the staple cartridge, slide it out.
3
Turn the staple cartridge upside down.