Toshiba e-STUDIO16 All in One Printer User Manual


 
2-5
1
2
3
4
5
6
7
9
10
11
12
8
Placing the Original on the Glass
Sheet Originals
1
Raise the original cover or the automatic document
feeder (optional) and place the original on the glass
facing down.
3
Lower the original cover or the automatic document
feeder (optional) slowly.
2
Align the original against the left inner corner of the
glass.
Tip
When copying originals with high transparency, such as an
OHP film and tracing paper, place a blank sheet of paper the
same size as the original or larger over the original.
Book-type Originals
1
Raise the original cover or the automatic document
feeder (optional) and set the original in the direction
shown in the figure.
If the original is not set in the correct direction, copies will
not be delivered in the correct page order.
2
Lower the original cover or the automatic document
feeder (optional) slowly.
Do not try to force the original cover or reversing automatic
document feeder (optional) to fully close over a very thick
original, such as a large book. Copies can be made if the
cover or feeder does not close fully.
During copying, an intense light may leak out. Do not look
at the original glass surface.
Automatic
document
feeder
Original
Original scale
Blank sheet
Original