Filter
Top Products
7-31
1
2
3
4
5
6
7
9
10
11
12
8
When the message display shows the following message, copying cannot be performed any longer.
8. CALLING FOR SERVICE
The telephone number of your service technician will be displayed (if pre-programmed).
Note the phone number, then turn the power off and immediately call for service.
Note
Since a heater is used to fix toner images to the copy paper, a safety circuit is incorporated in the
copier. After you turn on the power switch, if a certain temperature is not attained within a certain
period of time, the safety circuit assumes that something abnormal has happened. This causes the
operation of the copier to stop and display Call for service. This can occur when the temperature is
low even though the copier is not malfunctioning. If this occurs, turn the power switch off and then on
again. Repeat this procedure twice. If the problem still persists, turn off the power switch and call for
service.
Call for service