Filter
Top Products
Network Operator’s Guide — Managing Address Book 65
5. Enter following items according to the capabilities of recipi-
ent facsimile, and click [Save].
SUB — Enter the mailbox number if you want to send originals to the mailbox in
the recipient facsimile. You can enter up to 20 characters including numbers and
hyphenations (-), #, *.
SID — Enter the password to input a fax into the mailbox in the recipient facsim-
ile. You can enter up to 20 characters including numbers and hyphenations (-),
#, *.
SEP — Enter the mailbox number if you want to retrieve a document from the
mailbox in the recipient facsimile. You can enter up to 20 characters including
numbers and hyphenations (-), #, *.
PWD — Enter the password to retrieve a document from the mailbox in the recip-
ient facsimile. You can enter up to 20 characters including numbers and hyphen-
ations (-), #, *.
ECM — Enable or disable the ECM (Error Correction Mode). If enabled, it facili-
tates error free communications by automatically resending any portion of the
document affected by phone line noise or distortion.
Line Select — Select the line to be used. If this is set to “OFF”, this equipment
automatically selects the line to be used. However, “LINE 2” can be applicable
only when the optional line 2 board is installed.
Quality Transmit — Select if you want to send documents in the Quality TX
mode. This feature sends documents at a slower speed than a normal so that the
transmission will be less affected by line condition.
Transmission Type — Select whether the document will be sent in the Memory
TX mode or Direct TX mode.
SUPPLEMENT:
• If you want to clear the fax settings of the contact, click [Reset].