Filter
Top Products
Network Operator’s Guide — TopAccess Errors 95
2BD0
Power failure occurred during
e-Filing restoring.
Make sure that the power cable is con-
nected properly and it is inserted securely.
Resend the job.
2BE0
Failed to get machine parameter. Turn the power OFF and then back ON.
Retry the scan.
2BF0
Maximum number of pages has
been exceeded (list maximum).
Reduce the pages and print again.
2BF1
Maximum number of documents
has been exceeded (list maxi-
mum).
Delete the documents from the boxes or
folders.
2BF2
Maximum number of folders has
been exceeded (list maximum).
Delete the folders from the boxes.
RFC related
2500
Syntax error, command unrecog-
nized
Check if the Terminal mail address and
Destination mail address are correct.
Check if the mail server is operating prop-
erly. Turn the power OFF and then back
ON. Perform the job in error again.
2501
Syntax error in parameters or
arguments
Check if the mail server is operating prop-
erly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error
still occurs, Contact your service repre-
sentative.
2503
Bad sequence of commands Check if the mail server is operating prop-
erly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error
still occurs, Contact your service repre-
sentative.
2504
Command parameter not imple-
mented
Check if the mail server is operating prop-
erly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error
still occurs, Contact your service repre-
sentative.
2550
Mailbox unavailable Check the state of the mail box in the mail
server.
2551
User not local Check if the mail server is operating prop-
erly.
Turn the power OFF and the back ON.
Perform the job in error again. If the error
still occurs, Contact your service repre-
sentative.
Error Code Message Corrective Action