Filter
Top Products
- 106 -
EO1-11115
MA-186-100 SERIES
Z
OFF
X
REG
SET
(BLIND)
Numeric Key
3
Zero-amount
Format
0 . 0 0
. 0
for use in US or Canada
AT/TL
9
1 9
All Memory Clear
If the register becomes completely inoperative due to battery discharge or malfunction of the program
memory, the All Memory Clear operation must be carried out. When an All Memory Clear is operated, all
the memory contents that have been stored in the RAM will be cleared (i.e., the programmed data and the
sales data). Along with the clearing process, the designated zero-amount format is set and “Initial Data”
and “Initial Status” for respective programming items are automatically set.
Warning: This clear operation deletes all programmed data and sales data stored in the register’s
memory. (i.e., the register goes back to initial status.)
Operating Procedure
Condition: Any time, outside or during any operation sequence except during Key Setting or Key Location
Changing or System Option Setting procedure.
Operation:
Use the S Key to turn the
Control Lock to “BLIND”.
Depress the following Numeric Key according to the display and print format for zero amount and the
nation where the register is used:
Depress the key.
An All Memory Clear receipt is issued.
NOTE: When an All Memory Clear is operated, the condition “after all sales data reset” is obtained, just as
“Status Clear” or “Sales Memory Clear”. Therefore, no Reset Reports need to be taken for starting any
programming operation.
All Memory Clear Symbol Line
(39 for Numeric 39, 19 for Numeric 19)
Receipt Consecutive No. is reset
to 0001.
(Date and Time remain unreset.)
Zero-amount Display & Print Format
designated here.
Thank you
Call again
05.- 28.-9 7
39
★
0.0 0
000.1
13-04