Filter
Top Products
- 8 -
EO1-11115
MA-186-100 SERIES
Numeric Display
AMOUNT (8 digits for total display, 7 digits for entries):
Displays the numeric data, such as amount, quantity, etc. When
the obtained total or subtotal amount is 8-digit, the RPT digit is
also used for the amount display. When no entries are under way
and the Control Lock is in the REG position, the current time is
displayed.
DPT (2 digits): Displays the code which represents each Department key. It
stays lit when repeating the same department entry.
RPT (1 digit): Displays the repeat count of the same item. The count is indicated
from the second entry on, and only the last digit will be displayed
even if the count exceeds nine.
PLU (3 digits of the DPT and RPT are used for this purpose):
Displays the PLU code when any PLU is entered. It goes out when
repeating the same PLU entry, then only the RPT digit will be
displayed for the repeat entry count.
Message Descriptors (Triangular Lamps)
SIGN Illuminates when a cashier has signed ON if the cashier signing
ON method is selected (optional function).
ALM : Illuminates with the alarm buzzer to indicate that the last operation
or numeric entry was an error. To clear the error condition,
depress the [C] key.
R Illuminates when the Receipt-OFF mode is declared by the [LOG/
OFF RECEIPT] key. In this condition, no receipts will be issued for a
sale to be entered. To extinguish this lamp (i. e., to change into
Receipt-ON mode for issuing receipts), simply depress the [LOG/
RECEIPT] key again.
TL : Illuminates with the total amount displayed when a sale is final-
ized without any amount tendered.
ST : Illuminates with the subtotal amount displayed when the [ST] or
[TXBL TL] key is depressed.
CG : When an amount tendering operation has been performed, this
lamp illuminates with the amount of change due displayed.
:
: