Filter
Top Products
- 28 -
EO1-11115
MA-186-100 SERIES
Clearing Errors, or Clearing Wrong Declaration
Key or Wrong Numeric Entries
When in sale entries an error has occurred with an alarm buzzer (beeps for about 2 seconds only), a wrong
Declaration Key (such as [RTN MDSE], [TX/M], [GST/M], etc.) has been depressed, or a wrong numeric
data has been entered; depress the [C] key.
C (Clear Key)
1) Error has occurred (the alarm
buzzer is generated and the
“ALM” lamp illuminates), and
the keyboard is locked.
2) Declaration Key has been de-
pressed.
ex.)
3) Numeric Keys are entered.
ex.)
4) Declaration Key(s) + Numeric
Keys
ex.)
5) Numeric Keys + Non-motorized
Key (key that does not trigger
printing)
ex.)
6) Combination of 2) to 5)
7) Combination of 6) + 1)
The error condition is cleared (the
buzzer tone stops and the “ALM” lamp is
extinguished). Find the cause of the er-
ror, and do the operation again. Refer to
“Possible Cause of Error” attached
where an error may occur in each opera-
tion sequence on the following proce-
dure.
→ →
The entered data are all cleared at once.
The entered data are all cleared at once,
and the error condition is cleared also.
Refer to 1) for finding the cause of error.
C
→ →
C
→ →
C
RTN
MDSE
RTN
MDSE
X
2
1
07
05
0
4. If a transaction entered with the “R OFF” lamp illuminated and finalized but a receipt is required,
the [RECEIPT ISSUE] (Post-issue Receipt) key can be operated to issue a receipt (see “Post-
issue Receipt” on page 55).
5. Simply depress the [LOG/RECEIPT] key without a numeric entry. If the key is depressed with a
prior numeric entry in REG mode, it may turn out to be a Sign ON or Sign OFF operation (refer to
Chapter 17 on page 82).