Filter
Top Products
- 24 -
EO1-11115
MA-186-100 SERIES
NOTES: 1. If Key Installation Setting is operated for the first time, all the keys are already set as in the
Standard Keyboard Layout. Therefore, set only the keys that are to be changed as to their
locations or newly installed.
2. If a wrong code has been entered and the key has also been depressed (i.e.,a wrong code
has been set on a key), enter the correct code and depress the key. The code entered last
will be effective.
3. If “0” is entered as Key Code, the key will be dead and its memory will also be closed.
4. Each of the keys programmed in this operation will have its memory (if any) opened
automatically.
5. The [C] key, if once set with Key Code 95, may be used to clear an error , but it cannot be used
immediately after a Key Code entry (for the purpose of clearing the wrong Key Code error).
If any Key Code is entered and then the [C] key is depressed, that Key Code will be set on
the key that was once the [C] key.
6. On depressing the final [AT/TL] key, “0.00” is displayed in the AMOUNT portion , indicating
that the setting operation is completed. No printing occurs.
7. Use the Blank Keyboard Layout on the preceding page, if necessary, for your own keyboard
plan before starting the setting procedure.
8. Brief Information on Optional Keys:
[#/NS] (Non-add Number Print/No-sale Key)
It is unnecessary if the [#/CID] key and the [NS] key have already been installed. This
[#/NS] key has a double function performed by the above two keys.
[%+] (Percent Charge Key)
It is used to add a percent rate, preset or manually entered, to a sale or each sale item.
[LOG/RECEIPT] (Log/Receipt Key)
It is used for the cashier sign on/off operation when the cashier signing method
(optional function) has been selected. Also, used to select the receipt issue or non-
issue without entering numbers.
[RECEIPT ISSUE] (Post-receipt Key)
It is used to print the receipt of the last sale completed in registration.
[TX2/M] (Tax 2 Modifier Key)
It is necessary in the dual-tax (PST) area, in addition to [TX1/M], for reversing the Tax
2 taxable/non-taxable status of items.
[TAX] (Manual Tax Key)
It is used to enter an irregular tax amount.
[EX] (Tax Exempt Key)
It is used to exempt designated tax(es) from a sale.
[GST/M] (GST Modifier Key)
It is necessary in the GST-applicable area in Canada. It reverses the GST taxable/non-
taxable status of items.
9. If any of the following keys are newly installed or location is changed, its relevant programming
operations are further required (even if once programmed, re-programming is necessary
because the program data has been cleared):
Each Department Key ................. Department Status, LC (if required), Preset Price (if
required) of the Department
[PLU] ............................................. PLU Table
[%+], [%-] ...................................... Respective Preset % Rates (if required)
[TX(1)/M], [TX2/M], [GST/M] ........ Respective Tax Tables or Rates (Tax 1, Tax 2, GST)