Filter
Top Products
- 45 -
EO1-11115
MA-186-100 SERIES
PLU
To repeat
PLU
PLU Code
PL PL
TM TM
20.0
★
10.00
20.0
★
10.00
. . .
Price
PLU
PLU Code
To repeat
AMT
AMT
PL
TM
. . .
@/FOR
Quantity
PLU Code
PLU
. . .
PLU Code
PLU
Quantity
4. X
★
10.00 @
20.0
★
40.00
. . .
@/FOR
Unit Price
AMT
←
←
←
←
Quantity
Unit Price
Product
PLU Code
If an error occurs here:
Possible cause of error:
• Exceeding the digit limit
If an error occurs here:
Possible cause of error:
• Product exceeding 7 digits.
→ Check the Quantity.
If an error occurs here:
Possible cause of error:
• Exceeding the LC of the link Department
→ Check the Unit Price.
→ See Listing Capacity Open.
• Product exceeding 7 digits.
→ Check the Quantity and Unit Price.
If an error occurs here:
Possible cause of error:
• Exceeding the digit limit
Repeat Entry
Preset-price PLU
→
Open-price PLU
→
NOTE: A negative PLU entry cannot be repeated.
Quantity Extension (Multiplication)
Preset-price PLU
→
Open-price PLU
→ →
NOTES: 1. Quantity... Max. 6 digits (Max. 3 digits
for integer + max. 3 digits for decimal.
Use the [.] key if a decimal portion is
contained.)
Unit Price ... Max. 6 digits
Product (result of multiplication) ... Must
not exceed 7 digits.
2. The decimal portion of the Quantity en-
try is processed down to the 2 digits be-
low the decimal point. The fraction
rounding at this time is fixed to ROUND
OFF.
3. You can select the rounding process of
the fractions of the product —ROUND
OFF (initial setting), ROUND UP, or
ROUND DOWN. (Refer to Chapter “16.
System Option Setting, Address 2 -
Bits 1 and 2” on page 72.)