Filter
Top Products
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
2. Remove the HDD pack by pulling on the tab attached to the pack.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it fails.
3. Place the HDD pack on a flat surface such as a desk.
4. To separate the plate from the HDD, remove four M3x3 screws.
M3x3*4
Figure 4.3 Removing the HDD plate
CAUTION: Do not apply pressure to the top or bottom of the drive.
Satellite L500 Maintenance Manual 4-11