Filter
Top Products
4 Replacement Procedures Error! Style not defined. Error! Style not defined.
2. Remove the touch pad button board.
3. Remove two M2x3 screws from the touch pad bracket.
4. Remove the touch pad bracket.
M2x3*2
Figure 4.17 Removing the touch pad bracket
Installing the Touch Pad Button Board and Bracket
Install the touch pad button board and bracket according to the following procedures.
1. Seat the touch pad bracket in the correct position, then secure the bracket with two M2x3
screws.
2. Seat the touch pad button board over the touch pad bracket, then secure the board with
three M2x6 screws.
Satellite L500 Maintenance Manual 4-28