Filter
Top Products
4 Replacement Procedures Error! Style not defined. Error! Style not defined.
4.21 USB Board
Removing the USB Board
Remove the USB board according to the following procedures and Figure 4.46.
1. Remove two M2.5x5 screws that secure the USB board to the logic lower assembly.
2. Detach the USB cable from the motherboard and remove the USB board from the logic
lower assembly.
Satellite L500 Maintenance Manual 4-56
Figure 4.46 Removing the USB Board
embly.
assembly with two M2.5x5 screws.
M2.5x5*2
Installing the USB Board
Install the USB board according to the following procedures.
1. Seat the USB board in the correct position on the logic lower ass
2. Connect the USB cable to the motherboard. Secure the USB board to the logic lower