Filter
Top Products
4 Replacement Procedures Error! Style not defined. Error! Style not defined.
4.19 LCD Module and Inverter Board
Removing the LCD Module and Inverter Board
Remove the LCD module and the inverter board according to the following procedures and
Figure 4.39, 4.40, 4.41 and 4.42.
1. Remove one M2.5x4 screw securing the inverter board and detach two cables connected
to the two ends of the inverter. Then remove the inverter board.
Figure 4.39 Removing the Inverter Board
2. Remove six M2x3 screws securing the LCD module according to the sequence indicated
in the Figure 4.40.
M2.5x4*1
Satellite L500 Maintenance Manual 4-50