Filter
Top Products
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
Installing the VGA Board and Thermal Module
Install the VGA board and Thermal Module according to the following procedures.
1. Reapply Shinetsu 7762 grease on the thermal module as shown in Figure 4.26. If you use
one new thermal module, remove the release papers on the thermal pads first.
Thermal pad
Thermal pad
Thermal pad
Thermal pad
Thermal Grease
Figure 4.26 Reapply Shinetsu 7726 grease on the thermal module and
remove any release papers
NOTE: When thermal pad needs to be changed, please paste it in the location indicated in
Figure 4.26.
2. Seat the VGA board on the motherboard and secure it with two M2.5x5 screws.
3. Seat the thermal module in the correct position on the motherboard and secure it with six
spring screws according to the number sequence sealed on the thermal module.
Satellite L500 Maintenance Manual 4-37