Filter
Top Products
4 Replacement Procedures Error! Style not defined. Error! Style not defined.
4.9 Power Board
Removing the Power Board
Remove the power board according to the following procedures and Figure 4.15.
1. Remove three M2x3 screws from the power board.
2. Separate the power board from the logic upper assembly.
M2x3*3
Figure 4.15 Removing the power board
Installing the power switch board
Install the power switch according to the following procedures.
1. Seat the power board in the correct place on the logic upper assembly.
2. Secure the power board with three M2x3 screws.
Satellite L500 Maintenance Manual 4-26