Filter
Top Products
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
Installing the LCD Module and Inverter Board
Install the inverter board according to the following procedures.
1. Turn the LCD module cover and place it face down on a protective surface such as a
foam pad.
2. Connect the LVDS cable to the LCD panel connector.
3. Turn the LCD right side up.
4. Seat the LCD hinge assembly in the correct position beside the LCD panel and secure it
with six M2x3 screws according to the sequence indicated in Figure 4.43.
Figure 4.43 Installing the LCD Hinge Assembly
1
2
2
1
M2x3*6
3
3
Satellite L500 Maintenance Manual 4-53