Filter
Top Products
Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
3. Detach one Power board FFC and one Touch Pad cable as shown in Figure 4.14.
Figure 4.14 Detaching cables from under the keyboard
4. Lift up the logic upper assembly.
Installing the Logic Upper Assembly
Install the logic upper assembly according to the following procedures.
1. Seat the logic upper assembly to the front of the laptop, and adjust to the correct position.
2. Attach the two cables and secure the six screws as indicated in Figure 4.14 and 4.13.
3. Turn the laptop upside down and secure it with 17 screws as indicated in Figure 4.12:
fourteen M2.5x8 screws
three M2x3 screws
Satellite L500 Maintenance Manual 4-25