User’s Manual 8-11
PORTÉGÉ/TECRA R700 Series
MultiMediaCard
For further information, please refer to chapter 3, Hardware, Utilities and
Options.
Pointing device
If you are using a USB mouse, you should also refer to both the USB
mouse section in this chapter, and the documentation supplied with your
mouse.
Touch Pad
You cannot read a file Check to ensure the required file is actually on the
SD/SDHC/SDXC Card that is inserted into the
computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Problem Procedure
Problem Procedure
MultiMediaCard error
occurs
Remove the MultiMediaCard from the computer and
then reinsert it in order to ensure it is firmly
connected.
If the problem persists, then you should refer to the
documentation supplied with your MultiMediaCard
for further information.
You cannot write to a
MultiMediaCard
Remove the MultiMediaCard from the computer and
check to ensure that it is not write protected.
You cannot read a file Check to ensure the required file is actually on the
MultiMediaCard that is inserted into the computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Problem Procedure
The Touch Pad does
not work.
Check the Device Select settings.
Click Start -> Control Panel -> Hardware and
Sound -> Mouse.
Pressing FN + F9 to enable.
Pressing Touch Pad ON/OFF button to enable.
On-screen pointer
does not respond to
pointing device
operation
In this instance the system might be busy - Try
moving the mouse again after waiting a short while.