Filter
Top Products
User’s Manual 3-33
PORTÉGÉ/TECRA R700 Series
Settings for display video on HDMI
To view video on the HDMI device, be sure to configure the following
settings otherwise you may find that nothing is displayed.
Select HD Format
To select the display mode, follow the steps as detailed below:
1. Click Start and click Control Panel.
2. Click Appearance and Personalization.
3. Click Display.
4. Click Change Display settings.
5. Click Advanced settings.
6. Click List All Modes.
7. Select the one of the below selection at List All Modes.
When you connect a television or external monitor to the HDMI port and the
display output device is set to HDMI.
When you unplug the HDMI cable and re-plug it in please wait at least 5
seconds before you replug the HDMI cable again.
When you connect a television or external monitor to the HDMI port and
you connect the television, external monitor or external sound device to
another port.
When you change the display output or Unplug/re-plug the HDMI cable.
The sound output device and the display output device maybe changed
automatically by the system.
■ Be sure to use the FN + F5 HotKey to select the display device before
starting to play video. Do not change the display device while playing
video.
■ Do not change the display device under the following conditions.
While data is being read or written.
While communication is being carried out.
Display mode at "List All Modes" HD Format
1920 by 1080, True Color (32bit),
60Herts
1080p
1920 by 1080, True Color (32bit),
30Herts (Interlaced)
1080i
1280 by 720, True Color (32bit),
60Herts
720p