Filter
Top Products
User’s Manual 3-34
PORTÉGÉ/TECRA R700 Series
TOSHIBA Hi-Speed Port Replicator
In addition to the ports available on the computer, the TOSHIBA Hi-Speed
Port Replicator also provides several kinds of ports.
The TOSHIBA Hi-Speed Port Replicator connects directly to the docking
interface on the underside of the computer. The AC adaptor connects the
TOSHIBA Hi-Speed Port Replicator to a power source.
The following ports are available on the TOSHIBA Hi-Speed Port
Replicator.
■ RJ45 LAN jack
■ External monitor port
■ DC IN 19V jack
■ Security lock slot
■ Universal Serial Bus 2.0 port (four)
■ Universal Serial Bus 3.0 port (two)
■ Serial port
■ HDMI out port (some models are equipped with a HDMI out port)
■ Microphone jack
■ Line out (Headphones, Speakers)
720 by 576, True Color (32bit),
50Herts
576p
720 by 480, True Color (32bit),
60Herts
480p
Display mode at "List All Modes" HD Format
The above display mode is a typical HDMI display mode. The selectable
display modes will vary for different HDMI monitors.
■ You must connect the AC adaptor before you connect to a TOSHIBA
Hi-Speed Port Replicator.
■ When a TOSHIBA Hi-Speed Port Replicator is connected to the
computer, you can not use the following computer’s ports: LAN jack,
DC IN 19V jack and External monitor port.
■ When connecting an AC Adaptor to the TOSHIBA Hi-Speed Port
Replicator, use only the AC Adaptor included with TOSHIBA Hi-Speed
Port Replicator. Do not use the computer’s AC Adaptor.
■ When the replicator is docked, booting from USB 3.0 ports may be not
available. To check whether your computer supports booting from USB
3.0, please contact TOSHIBA support for assistance.
■ Refer to the TOSHIBA Hi-Speed Port Replicator User's Manual for
more details on connection methods.