Filter
Top Products
User’s Manual C-4
PORTÉGÉ/TECRA R700 Series
*1 Factory-set default channels
*2 The band width and the channel which can be used depends on the
installed wireless LAN module. And the approved channels on using are
different at each country or region. When using these channels in any
country or region, refer to the section Approved Countries/Regions for use
in the printed user’s manual. The channel configuration is managed as
follows:
■ For wireless clients that operate in a Wireless LAN Infrastructure, the
Wireless LAN module will automatically start operation at the channel
identified by the Wireless LAN Access Point. When roaming between
different access points the station can dynamically switch to another
channel if required.
■ In a Wireless LAN Access Point, the Wireless LAN module will use the
factory-set default channel (printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.
120
5600*
2
124
5620*
2
128
5640*
2
132
5660*
2
136
5680*
2
140
5700*
2
149
5745*
2
153
5765*
2
157
5785*
2
161
5805*
2
165
5825*
2