Filter
Top Products
User’s Manual 3-29
PORTÉGÉ/TECRA R700 Series
Figure 3-11 Removing the memory module
9. Seat the memory module cover in place and secure it with the screws.
10. Install the battery pack - refer to Replacing the battery pack section in
chapter 6, Power and Power-Up Modes, if required.
11. Turn your computer over.
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. To connect a monitor, follow the steps as detailed below:
■ Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
1. Latches
1
1
Take care to ensure that the memory module cover is firmly closed.
There are no fastening screws for an external monitor cable on this
computer's external monitor port. However, external monitor cables which
have connectors with fastening screws can still be used.